The project concerns the modernisation of four factory buildings at the ÜAZ Holleben Südstraße 4A site in 06179 Teutschenthal, each with four training units. At and in the four workshop buildings from 1995 with a total of 16 training units, there are structural and technical defects due to their age. In addition, the use of sanitary and changing areas is impaired. A reorganization is required.
The subject matter of the contract are services of technical equipment according to Part 4 Section 2 HOAI according to § 53 Abs. 2 HOAI, work phases 2-9 (step-by-step commissioning), plant groups 1, 2, 3 and 8.
The subject matter of the contract are services of technical equipment according to Part 4 Section 2 HOAI according to § 53 Abs. 2 HOAI, work phases 2-9 (step-by-step commissioning), plant groups 1, 2, 3 and 8. The project is a construction project funded by the Federal Ministry of Education and Research and the State of Saxony-Anhalt. Funding is provided on the basis of the "Joint Guidelines for the Promotion of Inter-Company Vocational Training Centres (ÜBS) and their Further Development into Competence Centres", the ancillary provisions for grants for project funding mentioned therein and taking into account the requirements of the Guideline for the Implementation of Funding Construction Measures (RZBau). Bau Bildung Sachsen-Anhalt e.V. is an educational service provider for the construction industry in the federal state of Saxony-Anhalt. The project is intended to modernise the four factory buildings at the ÜAZ Holleben site. The construction project is carried out during ongoing training operations. Therefore, it is necessary to carry them out in sections.
The following measures from KG 410 – 430 and 480 are required:
-Plumbing:
Renewal of complete sanitary facilities for toilets, washrooms, showers;
Renewal of the drinking water and waste water connection pipes including basic pipes for the new sanitary areas;
Renewal of hot water system with fresh water system;
Complete renewal of the lifting system for dirty and rainwater;
-Heating:
Renewal of the heat supply system and expansion to heating the halls and undersupplied areas including heat generation plant, heat distribution networks and space heating surfaces;
- Ventilation technology:
Renewal of the exhaust air system in the halls incl. motorized shutters;
Renewal of the ventilation system with heat recovery in the sanitary area;
- Building management system:
Installation of a BMS system including connection of the various system components
The four factory buildings are single-storey buildings without basements and have a total gross floor area (GFA) of 6,762.83 m² and a gross volume (BRI) of 36,857.16 m³. The estimated construction costs KG 300-400 are expected to be approx. 6,100,000 EUR/gross, of which approx. 2,300,000 EUR/gross are planned for KG 410-430 according to DIN 276.
A catalogue of measures and space programme confirmed by the funding bodies must be taken into account in further planning.
The provision of services performance phase 2 is expected to take place after commissioning from 01.03.2023 to 10.04.2023 and the services of performance phase 3 from 01.05.2023 to 31.08.2023.