1.Dismantling and transporting to the place indicated by the Contracting Authority in the area of the waste sorting shop, currently working baling press,

2.Delivery of new press with unloading in the area of the Waste Development Plant in Płońsk Street Pułttuska 5, 09-100 Rural Municipality of Płońsk.

3.Installation of the Press in place of the old press, including its installation and fixation, and installation and fixation of all supplied components. The execution of the necessary dismantling works will be carried out with the condition that all possible parts dismantled by the Contractor remain the property of the Contracting Authority and cannot leave the site of his establishment.

4.Provide the Ordering Party with documents and statements listed in §3 (8) of the draft contract.

5.Carrying out technical and technological commissioning as well as training fifteen contracting staff in the field of operation and operation of the press.

6.Exercise of Services and warranty obligations.

7.Providing technical consultations to the Contracting Authority.

1.Max. height to the top edge of the backfill hopper (press with ensured clearance above the ground min. 300 mm, allowing free cleaning of the area under the press and service access to the elements from the bottom of the press) - 3 640 mm. 2.Max. length between the backfill axle and the rear edge of the press-6000 mm.3.Max. width. press, together with the area occupied by open to the sides of the door (flaps) and service and service access — according to the attached sketch with the arrangement of collision elements of the existing sorting line structure at the place of assembly of the press.4.Dimensions of the hole of the backfill hopper (due to backfill and limitation of existing design) length 1400—1600 mm, width 920—1100 mm, 5.Min. backfill chamber volume 2.5 m³

6.Min. mass performance when pressing material with density: 30 kg/m3 - min 9 t/h, 50kg/m3 - min 14 t/h,100kg/m3 - min 19 t/h.7.Bale width 1000—1100 mm .8.Bale height 700 - 800 mm .9.Bale length adjustable.10.Bale density for paper 450—600 kg/m³ .11.11.11.Binding bales vertically, in the number of wires: 5 pcs.12.Pressure force of the main press (running from the back) min. 80 t .13.Power of the main drive max. 55 kW .14.Max. total power of electrical equipment installed in the press 70 kW

15.Balot binding assembly enabling automatic binding of 5 wires vertically with automatic twisting, clipping and retracting of wire. Press adapted to work on non-alloy steel wire, cold-drawn, soft-tempered fi 3.2 mm with a strength of 360 — 400 N/mm2 .16.Removable plates in the ironing chamber on the floor and side walls. In addition, plates on the floor made of hard-to-abrasive steel type Hardox min. 450 or identity.

17.A revision door that allows you to enter the ironing chamber from both sides of the press with safety lock .18.Oil cooler, automatically switched on when the oil temperature exceeds the maximum value specified in the DTR.

19.Perforator retractable and sliding into the backup hopper controlled from the desktop, perforating elements — easily removable e.g. screwed. Perforator retractable towards the gable wall of the hall. Support design of the perforator.

20.Capacity of bottle perforator min. PET 40,000 pcs With a capacity of 1.5 to 2 l. 21.Lock the baling process for other materials than PET with a perforator inserted into the hopper.

22.A separate operator desktop for the control of the press by the operator equipped with an electric heater with a thermostat. 23.Press control cabinet equipped with an electric heater with a thermostat.

24.Ground clearance under the press min. 300 mm, allowing free cleaning of the area under the press and service to the elements from the underside of the press (can be provided by a set of additional legs supporting the press).

25.Bales length meter. 26.Bale quantity counter. 27.Press timer. 28.The wire feed system enabling easy unfolding with spools along with spools, located along the press on its right side looking towards the outlet of the balots. 29.Chute leading the bales from the exit of the exit. press to the floor level of the hall — slide with arc diversion of the balots to the floor towards the entrance gate. 30.Complete control unit for operation control of 1 charging transporter — device through which the transporter is additionally switched on when the press is switched to work in the Sort line slot machine. 31.Control system with PLC controller including display and error list in English.

32.Adaptation to work in a vending machine with a conveyor line - equipment with 4 potential free contacts, transmitting signals: press readiness for work, machine operation, failure, loading transporter launch.

33.Automatic stop of the pump drive when the press is waiting for the material.34.Inverter control of the operation of the hydraulic pump drive engine. 35.Adjusting the pressure in the hydraulic system of the thrust duct flaps from the operator's desktop level - facilitating the ironing of various materials (plastics , paper, waste mixed). Cd in infor. additional