Charging infrastructure for electric buses

- Delivery, assembly, parameterization and commissioning of 52 high-performance DC chargers for electric buses with a nominal charging capacity (DC side) of at least 90 kW per charging point

- Up to two charging points must be supplied per charger for 'Bus Port 3' and up to four charging points for 'Bus Port 2', to which the charging power is distributed as dynamically as possible (parallel charging), taking into account the specifications of the LMS.

- Concept development for the installation: The installation area for the chargers is limited and is specified, a concept must be developed on the part of the contractor and a charging infrastructure must be offered that fits the specifications of the specified or available installation area.

- Delivery and installation of the depot boxes belonging to the chargers (small DC distributors) and the charging cables + plugs (nominal current 200 A, air-cooled). Installation of the chargers outdoors, partially covered including individual or group foundations. Connection of the chargers on the AC side to low-voltage switchgear within the storage hall and on the DC side to the above-mentioned depot boxes to truss constructions.