Firm services for the realization of prototypes of passage plugs 408, 411, 413 and 416

o Phase 1 - Mechanical and electrical studies

o Phase 2 - Realization of the bodies of the passage plugs (mechanical part)

o Phase 3 - Electrical and/or pneumatic equipment of bushing plugs

o Phase 4 - Lead filling of the bushing plugs

o Phase 5 - Conducting leakage tests on the bushing plugs,

o Phase 6- Plant Testing

o Phase 7 - On-site delivery of the crossing carried out after acceptance of CEA and cold tests.

o The Record of Works Perform (DOE)

Optional services

As part of this service, the Holder may be required to make additional caps, other than those requested in the firm services:

2-tube electrical type plug, 6-tube fluid type plug, 6-tube electrical plug and 3-tube camera type cap, according to plans specific to each cap

+ cables

Firm benefits

Services described in phases 1 to 7 included for all prototypes of plugs listed below:

. Plug 408: Power CRISTAL and turbo pump MAPPEVO

. 411 Plug: TOR sensor and acoustic measurements

. Cap 413: Crystal Resolver and IF104

. Cap 416: Crystal Laser

Optional services

1Electrical type plug with 2 tubes according to plan STAR542TRP301E00

o Mechanical part encryption (studies and realization)

o Encryption for mounting and equipping a tube equipped with either 1, 2 or 3 connectors on either side of the cap knowing that there may be 2 tubes on this plug.

o Figures of lead filling and all controls and tests as described in [R39]

6 tube fluid type plug according to plan STAR542TRP302E00

o Encryption mechanical part

o Encryption for mounting and equipping the 6 tubes equipped with connectors

o Figures of lead filling and all controls and tests as described in [R39]

6 tube electrical type plug according to plan STAR542TRP303E00

o Encryption mechanical part (body + tubes)

o Encryption for mounting and equipping the 6 tubes equipped with connectors

o Figures of lead filling and all controls and tests as described in [R39]

6 tube electropneumatic type plug according to plan STAR542TRP304E00

o Encryption mechanical part

o Encryption for mounting and equipping a tube equipped with pneumatic connectors

o Encryption for mounting and equipping a tube equipped with electrical connectors

o Figures of lead filling and all controls and tests as described in [R39]

3-tube camera type cap according to plan STAR542TRP305E00

o Encryption mechanical part

o Encryption for mounting and equipping the 3 tubes equipped with connectors