Provision of façade work as well as plastering and stucco work as part of the renovation of the Geschwister-Scholl-Realschule plus in Germersheim
The trade "façade work ETICS" includes the following work:
1. preparatory work
- Set up and clear the construction site and provide construction site equipment
2. Demolition work and work
- Establish an opening in existing ETICS (15 pcs)
- Break off plaster on surfaces and in reveals (500 sqm)
- complement existing ETICS made of mineral wool, new openings (80 m)
- complement existing ETICS made of mineral wool, areas (20 sqm)
- complement existing ETICS made of mineral wool, new elevator consoles (8 pcs)
- Supplement existing ETICS made of EPS, small areas (20 sqm)
3. Work on the external thermal insulation composite system
- Insulation layer made of mineral wool MW, 0.035 W/(mK), single-layer, D 140 mm, wall (1,600 sqm)
- Insulation layer made of mineral wool MW, 0.035 W/(mK), single-layer, D 220 mm, wall (40 m²)
- Insulation layer made of mineral wool MW, 0.035 W/(mK), single-layer, D 220 mm, support (320 m)
- Insulation layer made of mineral wool MW, 0.035 W/(mK), single-layer, D 40 mm, reveals/lintel (1,400 m)
- Insulation layer made of mineral wool MW, 0.035 W/(mK), single-layer, D 40 mm, external venetian blind boxes (420 m)
- Insulation layer made of mineral wool MW, 0.035 W/(mK), single-layer, D 15-60 mm, window sill (450 m)
- Backfilling of niches MW, D 200 mm (15 pcs)
- Bevel ETICS in soffit, as a connection to an existing window (10 m)
- Plinth closure above ground surface as system closure for external thermal insulation (160 m)
- Reinforcing plaster made of mineral dry mortar, D 6-8 mm, wall (2,150 sqm)
- Reinforcing plaster made of mineral dry mortar, D 6-8 mm, base (160 m)
- Reinforcing plaster made of mineral dry mortar, D 6-8 mm, support (370 m)
- Reinforcement layer in reveals/lintel, reveal depth 40 cm (1,400 m)
- Reinforcement layer in reveals/lintel, reveal depth 18 cm (220 m)
- Reinforcement layer in reveals/lintel, reveal depth 10 cm (80 m)
- Leveling filler for organic fine plaster, wall (2,150 sqm)
- Leveling filler for organic fine plaster, plinth (160 m)
- Leveling filler for organic fine plaster, support (370 m)
- Leveling filler for organic fine plaster, reveals/lintel, reveal depth 40 cm (1,400 m)
- Levelling filler for organic fine plaster, reveals/lintel, reveal depth 18 cm (220 m)
- Leveling filler for organic fine plaster, reveals/lintel, reveal depth 10 cm (80 m)
- Top plaster, silicone resin plaster, scratch plaster, grain size 2 mm, wall (2,100 sqm)
- Top plaster, silicone resin plaster, scratch plaster, grain size 2 mm, small area (12 pcs)
- Top plaster, silicone resin plaster, scratch plaster, grain size 2 mm, reveal, reveal depth 10 cm (80 m)
- Top plaster, lime cement plaster, comb plaster, grain size 1 mm, wall (60 sqm)
- Top plaster, lime cement plaster, comb plaster, grain size 1 mm, wall small area (10 pcs)
- Top plaster, lime cement plaster, comb plaster, grain size 1 mm, support (370 m)
- Top plaster, lime cement plaster, smooth plaster, grain size 1 mm, reveal, reveal depth 40 cm (1,400 m)
- Top plaster, lime cement plaster, smooth plaster, grain size 1 mm, reveal, reveal depth 18 cm (220 m)
- Top plaster, lime cement plaster, felt plaster, grain size 1 mm, plinth (160 m)
- Moisture protection for plaster surfaces that will later come into contact with soil or gravel fill, plinth (160 m)
- Silicate silica sol-based façade paint, biocide-free, wall (60 sqm)
- Silicate-silica sol-based façade paint, biocide-free, wall small area (10 pcs)
- Silicate silica sol-based façade paint, biocide-free, support (370 m)
- Silicate-silica sol-based façade paint, biocide-free, reveal, reveal depth 40 cm (1,400 m)
- Silicate silica sol-based façade paint, biocide-free, reveal, reveal depth 18 cm (220 m)
- Suspension and cladding of the roof overhang on the underside with approved system (180 sqm)
4. Additional work
- Shorten the bubble wrap (160 m)
- Check tear-off strength/adhesion as well as flatness of the existing substrate (1 psch)
- Check the substrate for damage and cavities or for compatibility of the adhesive mortar (2,000 sqm)
- Cleaning of the substrate from coarse dirt (2,000 sqm)
- Leveling plaster for elevated unevenness, supports (320 m)
- Leveling plaster for increased unevenness, area (100 sq.m.)
- absorbency-reducing base coat (50 sqm)
- Protective cover for windows and doors (1,100 sqm)
- Protective cover for components that are not to be plastered (150 sqm)
- Protective cover for floor surfaces (300 sq.m.)
- Diagonal reinforcement by means of mesh (760 pcs)
- Edge protection with fabric corner angle (2,100 m)
- Edge profile as plaster finish profile (500 m)
- Tropfkantenprofil (80 m)
- Connection joints with sealing tape (1,750 m)
- Plastic profile including joint sealing tape, window and door connection (1,700 m)
- Movement joint by means of movement joint profile, W 10-15 mm (120 m)
- Close the scaffolding anchor hole, adjust the structure (600 pcs)
- Mounting cuboid, PU rigid foam 198 x 198 mm (40 pcs)
- Allowance for special cuts and adaptation to penetrations (100 pcs)
- Allowance for driving rain tight sealing of the connection joints (80 m)
- Cutting out insulation boards for pipes (80 m)
- Sealing of connection joint with elastic sealant to adjacent component, W < 5 mm (2,100 m)
- Creation of an ETICS sample surface including color coating (1 pc.)
- Preparation of revision documents (1 psch)